Application Instructions

Step 1: Begin the process by thoroughly cleaning the car's paint surface. Wash and dry the vehicle. Ensure car’s surface is cool before application.

Step 2: Choose a dry and wind-free environment for application, strictly avoid outdoor spaces.

Step 3: Apply degreaser and use a towel to wipe off. It is not needed to wash the car after degreasing.

Step 4: Fold the application towel that is included in the kit for easy application with one hand. Drip product onto one side of the towel, ensuring it saturates thoroughly. Apply product to approximately 1/4 of a panel at a time.

Step 5: Work on one panel at a time, this ensures uniform application.

Step 6: Apply product in a unidirectional or S-shaped motion, completing the entire surface in one continuous process. IMPORTANT: DO NOT APPLY PRODUCT BACK AND FORTH.

Step 7: If a rainbow effect appears after application, it indicates that the layer applied is too thin. Repeat Step 6.

Note: In an event that you are unhappy with the application, you may remove it with the degreaser included in the kit. Do note that this has to be done within 15mins from application.